Every company has many different needs. Below are our most popular plans, however you can create custom plans, and purchase options. Our flexible plans enable you to mix and match the right equipment and options for different types of vehicles, assets, and inventory needs. We design it for you!
As low as $24.95 mo
The STX is a modular plug & play vehicle gateway providing real-time visibility to location, driver behavior. It is tested for vibration, shock, moisture, and extreme temperatures.
Engine diagnostics such as fuel consumption, oil pressure, distance traveled, RPM, and much more to the control center in real time comes standard.
Two digital inputs, 1 digital output and 1 analog input for event logs such as engine on/off, vibration alarm, door open/close are sent with the time stamp of the event are included but require professional installation. Digital Temperature Sensors, Driver ID units, and WiFi for camera setup are optional.
The Driver ID option authorizes drivers to start the vehicle with driver identification via dallas keys or passive RFID keys. It can also be set to allow anyone to start or run the vehicle with or without an annoying buzzing noise. Depending on the configuration, the unit can disable the vehicle so that it won't start in the case of theft or unauthorized use.
The base unit detects extreme driving behavior such as sudden acceleration or lane crossing, sharp turns and sudden braking, but the Driver ID option ensures that you know who is actually driving the vehicle at the time an incident occurs.
The Fleet Maintenance Module includes a dashboard which shows how many upcoming and overdue service events, Fuel Cost trends, Service Cost trends, Vehicle Inspections, Vehicles requiring service, Registration renewal reminders and more.
The Maintenance Status shows current Battery levels, Engine hours, Odometer mileage, last maintenance done and of course any maintenance updates are only a mouse click away.
Engine codes have a log of all events. Example: P0308 - Cylinder 8 Misfire Detected / ECU#1 - ECM (Engine control module) /
As low as $12.95 per mo
The battery powered Model ATX can operate for up to 5 years of tracking, up to 3000 GPS positions, on two standard off the shelf Type C High Current lithium batteries, reducing maintenance costs, providing inventory control and allowing you to rapidly detect & recover stolen equipment.
Programmed to send GPS location every XX hours (usually once a day) when the asset is stationary. Battery level is sent with every update.
Once movement/vibration is detected, the unit wakes up automatically, sends an alarm and switches to motion mode sending GPS positions every XX minutes for as long as the asset is in motion mode (usually every 60 minutes)
The large solar panel charges the integrated rechargeable lithium battery with power equivalent to the transmission of up to 20 GPS positions a day. Batteries can transmit up to 10,000 events when fully charged by the panel.
Rugged IP67 waterproof enclosure for external use.
Track your equipment inventory without needing to have your driver scan anything. If they get near the asset, the PTX will log it.
As low as $29.95 mo
The Model PTX is a wireless Active RFID GPS tracking system with all of the features of the STX. It includes driver behavior and engine diagnostics, Diver ID, and optional Maintenance Software.
It reads active RFID tags mounted on restoration equipment, porta-potties, rolloffs, containers, (refrigerated) trailers, trailers, inspection equipment, or any asset, thus providing accurate, scalable and extremely reliable visibility & control for any size application, even in harsh and remote environments.
As low as 75¢ per month
An easy-to-use cloud-based platform. Includes Real-time GPS tracking, Exact data on pick-up /drop-off of roll-off container, asset or bin including when and where and by which truck and driver
Length of time on a route, distance traveled, unplanned / planned stops and more.
Last location, Speed and direction of each vehicle in your fleet including Fuel Report, Engine diagnostics including battery level, RPM and odometer.
With a wide-range of integrated solutions for Fleet management, temperature monitoring, driver safety and more, we offer one unified platform to streamline your business and lower costs.
We can't list all of the options. If you can dream it, we will build it for you.
View real-time activity and current status across all your vehicles and assets, and remove map related chaos with smart clustering. At one glance, see key trends by teams, department or across your entire fleet.
The Industry’s Most Intuitive, All-In-One Solution For ELD • DVIR • IFTA
As Low as $15.99 per mo
Simply plug BlueLink into the vehicle's ECM port-with a 9-Pin, 6-Pin or OBDII Light / Heavy Duty Plug & Play Harness. Unique Pass-through connector allows access to ECM port with device plugged in.
BlueLink transfers the Jbus data to any tablet or smartphone via Bluetooth.
Standalone ELD Compliance Solution- For fleets looking for compliance only, BlueLink plugs into the vehicle’s ECM without interfering with your existing telematics installation.
Included Bluetooth BLE/USB, Engine diagnostics, three digital inputs, 2 digital outputs, 1 analog input. Accelerometer packaged with Driver Behavior software and iButton interface and Dallas Key for Driver ID.
DriverLog supports English, Spanish, French Canadian and Mandarin Chinese.
Hours of Service e-Log requires an Android device with a cellular data plan. 2 min GPS update on move and 2 hour update on stop. Includes monthly cellular data plan for fleet management and Maintenance Software.
Includes Hours of Service, Driver Vehicle Inspection Reporting, IFTA Fuel Tax & Fleet Management for both USA and Canada Rulings.
Camera system includes Driver and Dash combination. Up to 6 additional cameras for $10 per month per camera.
Included fleet management, Dual facing dash and driver cameras, manual download of video triggered by driver behavior events and live view of Driver and Road. Limit 2GB per mo - approx 350 manual event downloads and around 150 live view of 1 minute each.
Safeguard your drivers and your business from false insurance claims and improve your driver behavior. Not an addition software system, GPS Timeclock cameras are part of your strategic vehicle and asset system.
Events can be triggered by driver behavior. Unfortunately you can't depend on an employee to turn things on and do tasks they don't normally do. Most drivers aren't involved in accidents every day. Stand alone camera systems often just don't work when you need them. They may "lose" data and most techs aren't inclined to make sure that they work.
Your trucks can be targets for people desperate for cash. A good camera system can prevent insurance fraud and could even save a driver's license.
Includes Dual facing dash camera (two cameras - one facing the road and one the driver). Add up to a total of eight cameras per vehicle: Dash, driver, cargo, side camera and rear cameras. Every company has different needs, every vehicle can have different cameras and setup.
Manual download of video triggered by driver behavior events and live view of the front dash cam Driver and Road (Limit of 2GB per unit per month -around 500 manual event downloads and around 200 live view of 1 min each).
Includes fleet management. Alerts to events are displayed on your main mapping system as well as any other alert processes you set up. Nothing to install, no additional programs or passwords when you need to know the facts. Just click on the driver and then click the link you want, right on the main portal.
Flexible system enables you to set up your fleet the way you want. Everything is integrated into one system. Assets, Inventory, fleet, maintenance, and now cameras.